Age | Commit message (Collapse) | Author |
|
* Add account sensitized
* Fix i18n normalize
* Fix description and spec
* Fix spec
* Fix wording
|
|
* Add support for followers synchronization on the receiving end
Check the `collectionSynchronization` attribute on `Create` and `Announce`
activities and synchronize followers from provided collection if possible.
* Add tests for followers synchronization on the receiving end
* Add support for follower synchronization on the sender's end
* Add tests for the sending end
* Switch from AS attributes to HTTP header
Replace the custom `collectionSynchronization` ActivityStreams attribute by
an HTTP header (`X-AS-Collection-Synchronization`) with the same syntax as
the `Signature` header and the following fields:
- `collectionId` to specify which collection to synchronize
- `digest` for the SHA256 hex-digest of the list of followers known on the
receiving instance (where “receiving instance” is determined by accounts
sharing the same host name for their ActivityPub actor `id`)
- `url` of a collection that should be fetched by the instance actor
Internally, move away from the webfinger-based `domain` attribute and use
account `uri` prefix to group accounts.
* Add environment variable to disable followers synchronization
Since the whole mechanism relies on some new preconditions that, in some
extremely rare cases, might not be met, add an environment variable
(DISABLE_FOLLOWERS_SYNCHRONIZATION) to disable the mechanism altogether and
avoid followers being incorrectly removed.
The current conditions are:
1. all managed accounts' actor `id` and inbox URL have the same URI scheme and
netloc.
2. all accounts whose actor `id` or inbox URL share the same URI scheme and
netloc as a managed account must be managed by the same Mastodon instance
as well.
As far as Mastodon is concerned, breaking those preconditions require extensive
configuration changes in the reverse proxy and might also cause other issues.
Therefore, this environment variable provides a way out for people with highly
unusual configurations, and can be safely ignored for the overwhelming majority
of Mastodon administrators.
* Only set follower synchronization header on non-public statuses
This is to avoid unnecessary computations and allow Follow-related
activities to be handled by the usual codepath instead of going through
the synchronization mechanism (otherwise, any Follow/Undo/Accept activity
would trigger the synchronization mechanism even if processing the activity
itself would be enough to re-introduce synchronization)
* Change how ActivityPub::SynchronizeFollowersService handles follow requests
If the remote lists a local follower which we only know has sent a follow
request, consider the follow request as accepted instead of sending an Undo.
* Integrate review feeback
- rename X-AS-Collection-Synchronization to Collection-Synchronization
- various minor refactoring and code style changes
* Only select required fields when computing followers_hash
* Use actor URI rather than webfinger domain in synchronization endpoint
* Change hash computation to be a XOR of individual hashes
Makes it much easier to be memory-efficient, and avoid sorting discrepancy issues.
* Marginally improve followers_hash computation speed
* Further improve hash computation performances by using pluck_each
|
|
* Removed disabling comments for Style/MethodMissingSuper
* Update rubocop for codeclimate
|
|
This PR updates the `valid_url` regex and sanitizer allowlist to provide
support for Gemini urls.
Closes #14991
|
|
|
|
|
|
There are edge cases where requests to certain hosts timeout when
using the vanilla HTTP.rb gem, which the goldfinger gem uses. Now
that we no longer need to support OStatus servers, webfinger logic
is so simple that there is no point encapsulating it in a gem, so
we can just use our own Request class. With that, we benefit from
more robust timeout code and IPv4/IPv6 resolution.
Fix #14091
|
|
Fixes #13882
|
|
|
|
* Add bell button
Fix #4890
* Remove duplicate type from post-deployment migration
* Fix legacy class type mappings
* Improve query performance with better index
* Fix validation
* Remove redundant index from notifications
|
|
|
|
|
|
* Check for and record reblog info atomically
Instead of using ZREVRANK to determine whether a reblog is a new reblog or not,
use ZADD's NX option to perform the check/addition option atomically.
* Replace ZREVRANK call with ZSCORE key which is more efficient
* Make tests a bit stricter
* Fix off-by-one
|
|
|
|
* Add database support for list show-reply preferences
* Add backend support to read and update list-specific show_replies settings
* Add basic UI to set list replies setting
* Add specs for list replies policy
* Switch "cycling" reply policy link to a set of radio inputs
* Capitalize replies_policy strings
* Change radio button design to be consistent with that of the directory explorer
|
|
And remove highlighting in web UI
Full circle from #8940
|
|
* Bump rubocop from 0.86.0 to 0.88.0
Bumps [rubocop](https://github.com/rubocop-hq/rubocop) from 0.86.0 to 0.88.0.
- [Release notes](https://github.com/rubocop-hq/rubocop/releases)
- [Changelog](https://github.com/rubocop-hq/rubocop/blob/master/CHANGELOG.md)
- [Commits](https://github.com/rubocop-hq/rubocop/compare/v0.86.0...v0.88.0)
Signed-off-by: dependabot[bot] <support@github.com>
* Fix for latest RuboCop
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Yamagishi Kazutoshi <ykzts@desire.sh>
|
|
|
|
Follow-up to #14359
In the case of limited toots, the receiver may not be explicitly part of the
audience. If a specific user's inbox URI was specified, it makes sense to
dereference the toot from the corresponding user, instead of trying to find
someone in the explicit audience.
|
|
* Add support for inlined objects in activity audience
* Add tests
|
|
(#14479)
* Add tests
* Fix handling of Reject Follow when a matching follow relationship exists
Regression from #12199
|
|
* Fix not handling Undo on some activity types when they aren't inlined
When receiving an Undo for a non-inlined activity, try looking it up in
database using the URI. The queries are ad-hoc because we don't have a global
index of object URIs, and not all activity types are stored in database with
an index on their URI.
Announces are just statuses, and have an index on URIs, so this check can
be done efficiently.
Accepts cannot be handled at all because we don't record their URI at any
point.
Follows don't have an index on URI, but they have an index on the issuing
account, which should make such queries largely manageable.
Likes don't have an index on URI, they have an index on the issuing account,
but the number of favs per account may be very high, so I decided not to
handle that.
Blocks don't have an index on URI, but they have an index on the issuing
account, which should make such queries largely manageable.
In all cases, if an Undo could not be handled properly, we call `delete_later!`
because that does not require us to know more than the URI of the undone
property.
* Add tests
* Make newer blocks overwrite older ones
Allows re-synchronizing block info by re-blocking and un-blocking again
when the original Undo Block has been lost.
|
|
* Dereference object URIs in Create and Update messages
Fixes #14353
Signed-off-by: Thibaut Girka <thib@sitedethib.com>
* Refactor, and perform origin check *before* attempting to fetch object
Co-authored-by: Fire Demon <firedemon@creature.cafe>
|
|
|
|
* Fix movie width and frame_rate returning nil
* Add StreamValidationError and raise
* Fix code style
|
|
TL (#14339)
* Fix boosted toots from blocked account not being retroactively removed from TL
Fixes #14301
* Add test for clear_from_timeline
|
|
* Fix the local group's followers collection
* Fix to accept followed relayed_through_account
* Add local delivery to the group's followers
* Fix code style
* Revert "Add local delivery to the group's followers"
This reverts commit 3237effc199772e4c4d30f19082cbc5633f56196.
|
|
* Fix rubocop warning
* use limit variable
* use ContextCreatingMethods option
|
|
|
|
|
|
- Change audio files to not be stripped of metadata
- Automatically extract cover art from audio if it exists
- Add `thumbnail` parameter to `POST /api/v1/media`, `POST /api/v2/media` and `PUT /api/v1/media/:id`
- Add `icon` to represent it in attachments in ActivityPub
- Fix `preview_url` containing URL of missing missing image when there is no thumbnail instead of null
- Fix duration of audio not being displayed on public pages until the file is loaded
|
|
Thai does not separate words by spaces, so I figured out it should be
in 'reliable characters regexp' that denotes languages that do the same.
Related #13891.
|
|
Similarly to #12324, the code is passing an Account object where an id
is expected.
|
|
* FIX: filters ignore media descriptions
* remove parentheses to make codeclimate happy
* combine the text and run the regular expression only once.
https://github.com/tootsuite/mastodon/pull/13837#discussion_r431752581
* Fix use of “filter” instead of “compact”, fix coding style issues
Co-authored-by: Thibaut Girka <thib@sitedethib.com>
|
|
|
|
|
|
Fixes #13757
|
|
|
|
Fix #13086, close #13113
|
|
* Improve RSS entries for statuses
- Render polls in both accounts and tags serializers
- Refactor RSS serializers
- Change title preview to include ellipsis when truncated
- Change title preview to show CW instead of toot text
- Add tests
* Remove title from OEmbed serialization
Twitter doesn't serialize title either, and tihs allows us to move the
title formatting code to the RSS serializers.
|
|
|
|
|
|
* Fix PostgreSQL load when linking in announcements
Fixes #13245 by caching status lookups
Since statuses are supposed to be known already and we only
need their URLs and a few other things, caching them should
be fine.
Since it's only used by announcements so far, there won't
be much statuses to cache.
* Perform status lookup when saving announcements, not when rendering them
* Change EntityCache#status to fetch URLs instead of looking into the database
* Move announcement link lookup to publishing worker
* Address issues pointed out during review
|
|
Change `tootctl media lookup` to not use an interactive prompt
|
|
* Bump cld3 from 3.2.6 to 3.3.0
Bumps [cld3](https://github.com/akihikodaki/cld3-ruby) from 3.2.6 to 3.3.0.
- [Release notes](https://github.com/akihikodaki/cld3-ruby/releases)
- [Commits](https://github.com/akihikodaki/cld3-ruby/compare/v3.2.6...v3.3.0)
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
* Fix compatibility with cld3 3.3.0
Co-authored-by: dependabot-preview[bot] <27856297+dependabot-preview[bot]@users.noreply.github.com>
Co-authored-by: Eugen Rochko <eugen@zeonfederated.com>
|
|
|
|
- Disallow links with relative paths
- Disallow iframes with non-http protocols and relative paths
Close #13037
|
|
Fix OEmbed preview API leaking existence of private statuses (see #12930)
|
|
Change `all_day` to be a visual client-side cue only
Publish immediately if `scheduled_at` is in the past
Add `published_at` and `updated_at` to announcements JSON
|
|
* Add announcements
Fix #11006
* Add reactions to announcements
* Add admin UI for announcements
* Add unit tests
* Fix issues
- Add `with_dismissed` param to announcements API
- Fix end date not being formatted when time range is given
- Fix announcement delete causing reactions to send streaming updates
- Fix announcements container growing too wide and mascot too small
- Fix `all_day` being settable when no time range is given
- Change text "Update" to "Announcement"
* Fix scheduler unpublishing announcements before they are due
* Fix filter params not being passed to announcements filter
|