| Age | Commit message (Collapse) | Author |
|---|
|
Run keyword mutes on hashtags
|
|
|
|
* Add structure for lists
* Add list timeline streaming API
* Add list APIs, bind list-account relation to follow relation
* Add API for adding/removing accounts from lists
* Add pagination to lists API
* Add pagination to list accounts API
* Adjust scopes for new APIs
- Creating and modifying lists merely requires "write" scope
- Fetching information about lists merely requires "read" scope
* Add test for wrong user context on list timeline
* Clean up tests
|
|
StatusPolicy#account was renamed to StatusPolicy#current_account in
upstream. This commit renames the local-only changes to match and
augments the #show? policy spec with what we expect for local-only
toots.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
=~ made sense when we were passing it through to a regex, but we're no
longer doing that: TagMatcher looks at individual tags and returns a
value that *looks* like what you get out of #=~ but really isn't that
meaningful. Probably a good idea to not subvert convention like this
and instead use a name with guessable intent.
|
|
It is reasonable to expect someone to enter #foo to mute hashtag #foo.
However, tags are recorded on statuses without the preceding #.
To adjust for this, we build a separate tag matcher and use
Tag::HASHTAG_RE to extract a hashtag from the hashtag syntax.
|
|
|
|
Allow hiding reblogs on a per-follow basis
|
|
* Move some tests of User into Settings::ScopedSettings
* Add a test for User@settings
|
|
|
|
* Add a hide_notifications column to mutes
* Add muting_notifications? and a notifications argument to mute!
* block notifications in notify_service from hard muted accounts
* Add specs for how mute! interacts with muting_notifications?
* specs testing that hide_notifications in mutes actually hides notifications
* Add support for muting notifications in MuteService
* API support for muting notifications (and specs)
* Less gross passing of notifications flag
* Break out a separate mute modal with a hide-notifications checkbox.
* Convert profile header mute to use mute modal
* Satisfy eslint.
* specs for MuteService notifications params
* add trailing newlines to files for Pork :)
* Put the label for the hide notifications checkbox in a label element.
* Add a /api/v1/mutes/details route that just returns the array of mutes.
* Define a serializer for /api/v1/mutes/details
* Add more specs for the /api/v1/mutes/details endpoint
* Expose whether a mute hides notifications in the api/v1/relationships endpoint
* Show whether muted users' notifications are muted in account lists
* Allow modifying the hide_notifications of a mute with the /api/v1/accounts/:id/mute endpoint
* make the hide/unhide notifications buttons work
* satisfy eslint
* In probably dead code, replace a dispatch of muteAccount that was skipping the modal with launching the mute modal.
* fix a missing import
* add an explanatory comment to AccountInteractions
* Refactor handling of default params for muting to make code cleaner
* minor code style fixes oops
* Fixed a typo that was breaking the account mute API endpoint
* Apply white-space: nowrap to account relationships icons
* Fix code style issues
* Remove superfluous blank line
* Rename /api/v1/mutes/details -> /api/v2/mutes
* Don't serialize "account" in MuteSerializer
Doing so is somewhat unnecessary since it's always the current user's account.
* Fix wrong variable name in api/v2/mutes
* Use Toggle in place of checkbox in the mute modal.
* Make the Toggle in the mute modal look better
* Code style changes in specs and removed an extra space
* Code review suggestions from akihikodaki
Also fixed a syntax error in tests for AccountInteractions.
* Make AddHideNotificationsToMute Concurrent
It's not clear how much this will benefit instances in practice, as the
number of mutes tends to be pretty small, but this should prevent any
blocking migrations nonetheless.
* Fix up migration things
* Remove /api/v2/mutes
|
|
* Add tests for StreamEntry
- `#object_type`
- `#verb`
- `#mentions`
* Fix to test results instead of implementations
|
|
* Add option to block direct messages from people you don't follow
Fix #5326
* If the DM responds to a toot by recipient, allow it through
* i18n: Update Polish translation (for #5669) (#5673)
|
|
|
|
|
|
|
|
|
|
When given two regexps, Regexp.union preserves the options set (or not
set) on each regex; this meant that none of the multiline (m),
case-insensitivity (i), or extended syntax (x) options were set. Our
regexps are written expecting the m, i, and x options were set on all of
them, so we need to make sure that we preserve that behavior.
|
|
* Fabricate SessionActivation
not only user_id but user association.
* Add tests for SessionActivation
|
|
|
|
And even a relevant test. Whoops.
|
|
Note that this will only hide/show *future* reblogs by a user, and does
nothing to remove/add reblogs that are already in the timeline. I don't
think that's a particularly confusing behavior, and it's a lot easier
to implement (similar to mutes, I believe).
|
|
* Add tests for RemoteFollow.initialize
* Add tests for RemoteFollow#valid?
* Add tests for RemoteFollow#subscribe_address_for
|
|
* Add tests for Notification#target_status
* Add tests for Notification#browserable?
* Add tests for Notification.reload_stale_associations!
|
|
* Add a test for FollowRequest#authorize!
* Remove tests
There is no need to test
ActiveModel::Validations::ClassMethods#validates.
* Make an alias of destroy! as reject!
Instead of defining the method,
make an alias of destroy! as reject! because of reducing test.
|
|
* make accounts_controller_spec DRY
* Add blocked user spec
|
|
- `#local?`
- `#needs_redownload?`
- `#to_param`
|
|
|
|
|
|
There was a test when some of the properties are invalid, but none when all
of them are valid.
|
|
|
|
|
|
Looks like copied tempfile need to be flushed before further processing. This issue won't happen if the uploaded file has enough file size.
|
|
Keyword muting
|
|
gs-direct-timeline
|
|
|
|
This example actually checks matches at the end of a string.
|
|
* Lists all Direct statuses you've sent and received
* Displayed in Getting Started
* Streaming server support for direct TL
|
|
Ditto for ending with \b.
Consider muting the phrase "(hot take)". I stipulate it is reasonable
to enter this with the default "match whole word" behavior. Under the
old behavior, this would be encoded as
\b\(hot\ take\)\b
However, if \b is before the first character in the string and the first
character in the string is not a word character, then the match will
fail. Ditto for after. In our example, "(" is not a word character, so
this will not match statuses containing "(hot take)", and that's a very
surprising behavior.
To address this, we only add leading and trailing \b to keywords that
start or end with word characters.
|
|
|
|
|
|
There are two motivations for this:
1. It looks like we're going to add other features that require
server-side storage (e.g. user notes).
2. Namespacing glitchsoc modifications is a good idea anyway: even if we
do not end up doing (1), if upstream introduces a keyword-mute feature
that also uses a "KeywordMute" model, we can avoid some merge
conflicts this way and work on the more interesting task of
choosing which implementation to use.
|
|
Word-boundary matching only works as intended in English and languages
that use similar word-breaking characters; it doesn't work so well in
(say) Japanese, Chinese, or Thai. It's unacceptable to have a feature
that doesn't work as intended for some languages. (Moreso especially
considering that it's likely that the largest contingent on the Mastodon
bit of the fediverse speaks Japanese.)
There are rules specified in Unicode TR29[1] for word-breaking across
all languages supported by Unicode, but the rules deliberately do not
cover all cases. In fact, TR29 states
For example, reliable detection of word boundaries in languages such
as Thai, Lao, Chinese, or Japanese requires the use of dictionary
lookup, analogous to English hyphenation.
So we aren't going to be able to make word detection work with regexes
within Mastodon (or glitchsoc). However, for a first pass (even if it's
kind of punting) we can allow the user to choose whether they want word
or substring detection and warn about the limitations of this
implementation in, say, docs.
[1]: https://unicode.org/reports/tr29/
https://web.archive.org/web/20171001005125/https://unicode.org/reports/tr29/
|
|
This should eventually be accessible via the API and the web frontend,
but I find it easier to set up an editing interface using Rails
templates and the like. We can always take it out if it turns out we
don't need it.
|
